Products

Hydrobrown II ESP Packer

HYDROBROWN II ESP PACKER

The HydroBrown II ESP Packer is a dual-string hydraulic-set double-grip retrievable production packer meant to be ran above an ESP assembly. The versatile HydroBrown-II is also available with additional feedthroughs for Vent valves, chemical-injection lines, control lines, and well-monitoring devices.

APPLICATIONS

  • Deviated and horizontal wells
  • High-volume instrumented applications
  • Well monitoring, gas venting, chemical injection, and hydraulic-line access

FEATURES

  • Adjustable Shear Release;
  • Release shear pins not affected by differential pressures;
  • Short and compact, ideal for doglegs and deviated wells;
  • Straight-pull release on long string;
  • Optional swivel sub on long string for easy make-up;
  • No mandrel movement: can be run in stacked packer applications;
  • Can be pressure-tested before running;
  • Additional control line and vent valve feed through capability available;
  • No hydraulic hold-down buttons

OPERATION

Temporarily plug the long string below the packer and apply tubing pressure. The packer should now be fully set and can be. If running stacked packers, all packers may be set simultaneously as the setting mechanism of one packer does not affect the setting of adjacent packers. The packer is released by a straight pick up, shear-release on the long string.

 

Additional sizes available upon request

/by

Hydrobrown I

HYDROBROWN I HYDRAULIC PACKER

The HydroBrown I Production Packer is a retrievable, double-grip, production packer. It set using hydraulic pressure on the tubing string and retrieved by straight pull. The packer features no downward mandrel movement during setting so it can be run in stacked applications. This feature eliminates the need for staging setting pressures between packers, since all packers are set simultaneously. The HydroBrown I packer is ideally suited for running below dual string packers as well, and may be set after the well has been flanged up. With the HydroBrown I packer, the tubing may be landed in tension, compression or neutral, in deviated and horizontal holes. It may also be run in applications using gas lift mandrels and safety valves where tubing rotation is not desirable. If needed, the HydroBrown packer may be run with tubing compensating equipment such as tubing seal receptacles, PBR’s and expansion joints.

FEATURES

  • Adjustable straight pull release;
  • Can be landed in tension, neutral or compression;
  • No downward mandrel movement for stacked applications;
  • Elastomer and metallurgical options available for hostile environments;
  • Compensating piston counteracts pressure from below;
  • Works with tubing disconnect tools and expansion joints;
  • Can be run with On-Off Tool and wireline plug to act as a bridge plug
  • Ideal for use with fiberglass tubing, or coil tubing

SPECIFICATIONS

Additional sizes available upon request

/by

Brownset I-X

BROWNSET I-X MECHANICAL PACKER

The BROWNSET I-X Mechanical Packer is a high pressure, retrievable, ¼ right-hand turn set and release production packer that has the versatility to be landed in tension, compression, or neutral position. The BROWNSET I-X Mechanical Packer is available in different version

  • BROWNSET I-X 5K & /K economical versions in 80k material
  • BROWNSET I-X  10K & HP version in P110 or other material

The BROWNSET I-X 10K and HP packer is the high-pressure version of the BROWNSET I-X packer. The packer ranges in sizes from 2 7/8 up to 7’’. Other sizes are available upon request.

FEATURES

  • Available in different materials to meet various pressure applications;
  • Can be set using tension or compression;
  • Right-hand 1/4 turn set and release
  • Field-proven easy to release retrieving system with optional safety-rotational release
  • Bypass located below upper slips to wash debris off slips once opened.
  • Readily converts to wireline set – tubing retrieval (select sizes)
  • Can be run with On-Off Tool and wireline plug to act as a bridge plug
  • Can be left in tension, compression, or neutral position
  • Extra large Jay Pin for extra strength during frac operations
  • Ideal for use with fiberglass tubing

SPECIFICATIONS

/by